Chassis - Introduction - Monaco Cayman 2005 Owner's Manual

This section contains knowledge and information on various components of the motorhome chassis.
Following the guidelines and procedures will help you to understand and operate your motorhome.
Complete instructions for engine and transmission are located in their respective operators manual
included in the Owner's Information File box.
WARNING:
When frame or other welding is involved for motorhome repair or modification,
only qualified, experienced technicians should weld on the chassis. Improper welding pro-
cedures and materials may weaken the assembly or result in damage that is not obvi-
ous and may not cause an immediate problem or failure. Unauthorized modifications or
repairs to the chassis could result in a forfeiture of warranty coverage.
Due to the sensitive nature of the electronics on the chassis, the following precautions
are required to protect electrical components in the motorhome chassis.
1. Disconnect the (+) positive and (-) negative battery connection, and any
electronic control ground wires connected to the frame or chassis.
2. Cover electronic control components and wiring to protect from hot
sparks.
3. Disconnect the terminal plugs from the engine Electronic Control Unit
located on the passenger side of the engine block.
4. Disconnect all the plugs from the Allison Electronic Control Module
located in the Electrical Bay at the driver's side front of the vehicle.
5. Disconnect the wiring from the alternator.
6. Do not connect welding cables to electronic control components.
7. Attach the welding ground cable no more than two feet from the part to
be welded.
Cayman 2005

CHASSIS - INTRODUCTION

Chassis Information --- Section 10
319