Installation; Safety Information; Installation In The Connection Head - Siemens SITRANS T Series Operating Instructions Manual

Installation

4.1

Safety information

Mounting in hazardous areas
Make sure you observe the following information before installing the transmitter:
• Install the transmitter in an enclosure appropriate for the envisaged application
• In hazardous areas, also observe the requirements specified in the Ex certificates and
Exceeded maximum ambient or process media temperature
Danger of explosion in hazardous areas.
Device damage.
• Make sure that the maximum permissible ambient and process media temperatures of
4.2

Installation in the connection head

Note
The transmitter is only designed for installation in a type B connection head or larger.
The transmitter is either secured in the base of the connection head or in the raised cover of
the connection head.
Included in the transmitter's scope of delivery are:
● Springs
● Fixing screws
● Lock washers for installation on the round plate (TH200/TH300 only)
SITRANS TH200/TH300
Operating Instructions, 08/2015, A5E00393069-04
WARNING
approvals.
WARNING
the device are not exceeded. Refer to the information in Chapter "Auto-Hotspot".
4
19