Atys R Accessories Available - socomec ATyS Instruction Manual

5.4. ATyS r ACCESSORIES AVAILABLE
BRIDGING BARS
To connect switch I & II load terminals together.
TERMINAL SHROUDS (125 TO 630 A)
Incoming and outgoing protection against direct
contact with the connection terminals or parts. Cannot
be mounted in the rear position at the same time as
the voltage sensing and power outlet kit or the bridging
bars. Can be mounted top or bottom, in front or in rear
position.
TERMINAL SCREENS
Incoming and outgoing protection against direct
contact with the connection terminals or parts.
DOOR ESCUTCHEON PLATE
Anaccessorytobefixedontoacabinetdoortoframe
thecontrollerpartofflushmountedATyS rtransfer
switches.
SUPPLEMENTARY AUXILIARY CONTACT (AC)
Pre-breaking and signaling of positions I and II: 1
additionalauxiliarycontactNO/NCauxiliarycontact
in each position. Included as standard for ratings from
2000 to 3200A. For Low level AC: please consult
SOCOMEC.
KEY LOCK AUTO / MANUAL SELECTOR SWITCH
The ATyS rmodeselectorswitchisdeliveredwitha
rotary handle as standard. This can be replaced with a
key lock.
Downloadkeylockassemblyinstructionsfordetails.
Ref.9599 1007.
ATyS / ATyS r - 541630C - SOCOMEC
RONIS KEY PADLOCKING ACCESSORIES
Locking of the electrical and manual operation by
means of a RONIS EL11AP lock. Possibility of locking
inallpositions,ifthe"Padlockinginthe3positions"
option is ordered.
Notcompatiblewithflushmounting.
PADLOCKING IN 3 POSITIONS
Allows locking of the operation in the 3 positions I, 0 and II.
(Factoryfittedaccessory)
DC POWER SUPPLY (DC -> AC)
Allowsastandard230VacATyS rtobesuppliedthrough
a12/24VdcAuxPowersupply.Availableforratingsupto
1600A
CONTROL VOLTAGE TRANSFORMER
Allows a standard 230 V AC device to be supplied with
400 VAC.
Others:
Refer to the end of this instruction manual or the latest
SOCOMEC product catalogue.
(Downloadablefromwww.socomec.com)
19
EN