Fujitsu PRIMERGY TX150 S5 Operating Manual page 55

Hardware Installation
Figure 18: Inserting the server
Ê Lift the server onto the two telescopic rails (1).
V
CAUTION!
Never lift the server into the rack using the handles on the front panel.
Ê Slide the server slightly in the direction of the arrow (2) until the hooks (3)
engage. When doing this, ensure that the telescopic rails are kept in a locked
position.
Ê Secure the server to the telescopic rails with one M3x6 screw on each
side (4).
The following steps can then be carried out by one person only.
Ê Unlock the telescopic rails (5a + 5b) on both sides and slide the server into
the rack (6) as far as it will go.
TX150 S5
!
"
# =
Operating Manual
Installing/Removing the Rack Model
# >
$
55