Fujitsu PRIMERGY TX150 S5 Operating Manual page 59

Hardware Installation
Figure 21: Connecting the server to the mains (floorstand model with hot pluggable power
supply units)
Ê Connect the power cord to the server power supply (1).
Ê Connect the power plug to a grounded shockproof socket (2) on the internal
supply network or to the multiple socket outlet in the rack (see Technical
Manual for rack).
I
If the server has two hot pluggable power supply units, the server can be
connected to the mains with phase redundancy.
In this case, each of the power supply units is either connected to two
different phases or to two separate circuits of the internal power supply
network.
TX150 S5
Connecting the Server to the Mains
Operating Manual 59