Installation Steps: Overview
Ê Configure the server and install the desired operating system and applica-
tions. The following options are available:
– For the SAS server version:
Configure the onboard SAS controller with IME functionality in the BIOS-
POST by pressing CTRL-C or, for installation with ServerStart, using GAM
(Global Array Manager) or ServerView RAID
Configure the ZCR controller in the BIOS-POST by pressing CTRL-H or,
for installation with ServerStart, using GAM (Global Array Manager) or
ServerView RAID
– For the SATA server version:
Configure the onboard SATA controller in the BIOS-POST by pressing
CTRL-M or, for installation with ServerStart, using GAM (Global Array
Manager) or ServerView RAID
Configure the PCI SATA RAID controller in the BIOS-POST by pressing
CTRL-H or, for installation with ServerStart, using GAM (Global Array
Manager) or ServerView RAID
– Remote configuration and installation with ServerStart:
The ServerStart CD supplied allows you to conveniently configure the
server and install the operating system.
Details on how to operate ServerStart, as well as some additional infor-
mation, can be found in the "ServerView Suite - ServerStart" manual,
supplied as a PDF file.
Configuration information can also be found in section
with ServerStart" on page
– Local configuration and installation with or without ServerStart (see
section
"Configuration with ServerStart" on page 73
without ServerStart" on page
18
73.
74).
Operating Manual
"Configuration
or
"Configuration
TX150 S5