Clearance For Ventilation; Cleaning And Maintenance - Orion OLMU-K4940 User Manual

Clearance for Ventilation

※
- When you install monitor make sure there is at least 20cm clearance for effective
ventilation and do not seal off monitor sets.
If monitor sets are installed at the locations of bad ventilation, the inner
temperature can be raised rapidly and it can cause frequent malfunctions and
rapid reduction of the product life.
* V entilation space in front of monitor must be furnished for heat dispersion.If the
front space of monitor has to be sealed, there must be consideration for the heat
dispersion in the rear side of monitor.
- 6 -

Cleaning and Maintenance

※
- Regularly clean off the vent holes in the back of monitor sets.
If the vent holes and the fan air holes are clogged with dust, it prevents the air
flow inside of monitor sets.
It can cause rapid increase of the inner temperature and may cause malfunctions.
Clean off the vent holes and the fan air holes with a vacuum cleaner regularly .
V acuum Cleaner
- 7 -