•
Model Info : Click → " GET " button to check model information
•
TAG NAME SET
1. Select the panel
2. Type in edit box and click the set button.
3. Check the Tag name
•
F/W VERSION GET
1. Select the panel
2. Click the GET button, then firmware version is loaded.
- M:STM firmware version S: RTD firmware version.
- When Standby mode, only STM firmware version is loaded.
- 66 -
S:1.1.67 M: 1.1.67
•
HELP menu > About
- Click About item in HELP menu, OSW information will be shown.
6.7.6. Bezel Control
• Go to " OTHER → Bezel Comp " to control Bezel Compensation
•
•
Bezel Compensation : Bezel Compensation On/Off
Bezel Comp Value : Compensating the frame width.(0~10)
- 67 -