Orion OLMU-K4940 User Manual page 28

6. Input the network information of the user's PC to be identical with MLCD set.
However, the final digit of the IP address must be different.
- 52 -
6.4. Screen Configuration
■ Input column/row number of the MLCD Matrix.
•
Column/row can be selected within the range from 1 to 16. The maximum MLCD quantity
of OSW control is 240 sets.
(The multiplies of X and Y cannot exceed 240. So, if X is set to 16, the max of Y is 15).
•
After inputting column/row number, MLCD matrix with input source color is displayed in
the "Screen Configuration" after click the button "SET"
Screen Configuration Setting
■ BROADCAST.
•
When broadcast checkbox is checked, entire command transmission method is
broadcast.
•
When broadcast checkbox is not checked, entire command transmission method is
normal mode.
•
User Transmit the Protocol command respectively to Selected MLCD Sets in normal
transmission method.
※You can't select the MLCD in screen configuration in broadcast.
■ DRAG MODE.
•
When the Drag Mode checkbox is not checked,
clicked only one.
Mode Setting
the screen configuration window will be
- 53 -