Clearance For Ventilation; Do Not Cover The Vent Hole For The Fan; Cleaning And Maintenance - Orion OLM-5510 User Manual

ORION

※Clearance for Ventilation

- When you install MLCD, make sure there is at least 20cm clearance for effective
ventilation and do not seal off MLCD sets.
If MLCD sets are installed at the locations of bad ventilation, the inner temperature
can be raised rapidly and it can cause frequent malfunctions and rapid reduction
of the product life.
※ Ventilation space in front of MLCD must be furnished for heat dispersion.If the
front space of MLCD has to be sealed, there must be consideration for the heat
dispersion in the rear side of MLCD.
- 6 -

※Do not cover the vent hole for the fan

- Carefully install MLCD not to cover the fan air holes with any structural object.
If the holes are covered with anything, the inner temperature can be raised
rapidly and it can cause malfunctions.


※Cleaning and Maintenance

- Regularly clean off the vent holes in the back of MLCD sets.
If the vent holes and the fan air holes are clogged with dust, it prevents the air flow
inside of MLCD sets.
It can cause rapid increase of the inner temperature and may cause malfunctions.
Clean off the vent holes and the fan air holes with a vacuum cleaner regularly.
MLCD
Infinitely Expandable
Installation structure
FAN
MLCD
• Model Name : OLM-4610
• Voltage : AC~100 - 240V
• Frequency : 50/60Hz • Current : Max. 3A
• Serial No :
Made in Korea CO., LTD.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
To prevent electric shock, Do not remove cover. No user serviceable part inside Refer servicing to qualified service personal.
ID SELECT
PC
IN OUT
FAN STB PWR ON VIDEO
IN OUT
DVI-D
LAN
IN OUT
RS-232C
SVC IN OUT
Vacuum Cleaner
- 7 -