Table of Contents
Advertisement
9. Repeat the above 7) and 8) procedures for the rest of displays in the same order as the
number of the 10) procedure's capture view.
10.After setting last MLCD set, ID setting status in OSW Screen Configuration is as follows.
It's different from physical RS-232C cable connection.
- 30 -
ID 1
ID 3
ID 2
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
4.3. Using Auto Setting
ㆍThis feature is a way to automatically set the ID by entering a cable connection order
※ NOTE : This function is supported on OSW 2.1.3 and later versions.
1. Monitor Configuration
ㆍ Enter the horizontal and vertical numbers in the X / Y fields. Click the SET button.
- 31 -
Advertisement
Table of Contents
