Orion OLMU-K4940 User Manual page 27

6. Save the IP address by clicking "SET " button after type-in.
7. Click "GET" button and check whether the IP address is correct.
- 50 -
6.3.3.2. In case of connection to user's computer
■ Check the network information
1. Execute the OSW
2. Serial Connection, Turn on the MLCD.
3. Click left top of the mouse on the MLCD that you want to control on the screen configuration
window.(This MLCD should be connected to LAN cable)
4. Click → OTHER → LAN
5. Click the "LAN ON" and click "GET" button to read the initial network
configuration of the MLCD
- 51 -