Orion OLMU-K4940 User Manual page 26

6.3.3. LAN Port For MLCD
6.3.3.1 In case of connection to a LAN Hub
•
This function is used to control the MLCD via LAN PORT.
•
During the setting process, MLCD and control PC should be connected via RS-232C
cable only. Do not connect Ethernet.
•
After setting process, the control PC should be connected to one of MLCD sets with
Ethernet cable only. For the connection between the MLCD sets, they should be
connected with RS-232C cables.
※The Ethernet cable should be connected to RS-232C starting point
■ Network IP setting for MLCD
1. Execute the OSW.
2. After Serial Connection, Turn on the MLCD.
3. Click left button of the mouse on the MLCD that you want to control on the screen con
figuration window.(This MLCD should be connected to LAN cable)
- 48 -
4. Click " OTHER → LAN "
5. Type in the IP address provided by the network administrator.
- 49 -