Procedure; More Information - FLIR T6 Series User Manual

Hide thumbs Also See for T6 Series:

Table of Contents

Find Quality Products Online at:

Fetching data from external FLIR meters

17.4.2 Procedure

Follow this procedure:

1. Use the infrared camera to identify any potential damp areas behind walls and

ceilings.

2. Use the moisture meter to measure the moisture levels at various suspect locations

that may have been found.

3. When an area of particular interest is located, store the moisture reading in the mois-

ture meter's memory and identify the measurement area with a handprint or other

thermal identifying marker.

4. Recall the reading from the meter memory. The moisture meter will now continuously

transmit this reading to the infrared camera.

5. Use the camera to take a thermal image of the area with the identifying marker. The

stored data from the moisture meter will also be saved on the image.

For more information, see the users' manuals that are shipped with the FLIR meters.

GlobalTestSupply

www.

#T559880; r. AM/56659/56659; en-US

.com

sales@GlobalTestSupply.com

Table of Contents