Working With Color Alarms And Isotherms; Color Alarms; General; Image Examples - FLIR T6 Series User Manual

Hide thumbs Also See for T6 Series:

Table of Contents

Find Quality Products Online at:

Working with color alarms and

isotherms

By using color alarms (isotherms), anomalies can easily be discovered in an infrared im-

age. The isotherm command applies a contrasting color to all pixels with a temperature

above, below, or between the set temperature levels. The camera also features isotherm

types that are specific to the building trade: condensation and insulation alarms.

You can make the camera trigger the following types of color alarms:

• Above alarm: This will apply a contrasting color to all pixels with a temperature above

the specified temperature level.

• Below alarm: This will apply a contrasting color to all pixels with a temperature below

the specified temperature level.

• Interval alarm: This will apply a contrasting color to all pixels with a temperature be-

tween two specified temperature levels.

• Condensation alarm: Triggers when the camera detects a surface where the relative

humidity exceeds a preset value.

• Insulation alarm: Triggers when there is an insulation deficiency in a wall.

This table explains the different color alarms (isotherms).

Color alarm

Above alarm

Below alarm

GlobalTestSupply

www.

#T559880; r. AM/56659/56659; en-US

Image

.com

sales@GlobalTestSupply.com

Table of Contents