CraftBot CB4 FLOW Series User Manual page 26

Variable values:
• temperature
• speed
• light
• encoder
• camera
• Temperature
• Head and build plate temperature can be
adjusted separately.
• Adjust the temperature of the head and the
build plate using the slider and the + and –
buttons.
• Speed
• In the Settings
button.
• There are 3 type of speed that you can control:
o fan speed
o print speed
o filament flow speed
• You can reset all changed values
• Light
• In the Settings
button.
• Move the slider from left to the right to
vary the brightness of the light.
• There are two types of fan:
• the interion LED lighting
• LCD display backlighting
• Extrude
• This menu is inactive while printing. Active in
Pause menu after head stops.
menu, select the Speed
menu select the Light
26