Calibration Settings - CraftBot CB4 FLOW Series User Manual

• Sound
• After touching the second button (Sound)
in the top submenu, a new screen
appears again.
• In the menu, you can turn the volume on
or off and the slider to adjust the volume.
• Time
• After touching the third button (Time) in
the top submenu, a new screen appears
again.
• Set the time of the zone to determine
the current time.
6.4.

Calibration settings

CraftBot has a leveling procedure which ensures that the extruder and the
heated build plate are at optimal distance and they must be leveled evenly. Smaller
gap or uneven levelling may lead to the damaging of the Kapton cover of the build
plate or the extruder.
Select the Settings menu
• There are several calibrations to choose from on the new screen. Drag the tabs to
the right next to the calibrations you want to run and launch them using the
button below.
There are 4 type of calibration:
• Manual bed
• Mesh bed
• Extruder
• Offset
• For a successful calibration and printing, it is essential to start with Offset
calibration. This is a continuously defined Z, X and Y dimensions.
• After all calibration options are started at the same time, the printer automatically
on the LCD screen and touch the Calibrate icon.
14