Binks MX1231 Series Assemblies
  1. Manuals
  2. Brands
  3. Binks Manuals
  4. Water Pump
  5. MX1231 Series
  6. Assemblies

Binks MX1231 Series Assemblies

Bare pump
Hide thumbs Also See for MX1231 Series:

Advertisement

Table of Contents

Models: MX1231PL (PTFE/LEATHER CHEVRONS), MX1231PP (PTFE CHEVRONS),
MX1231PU (PTFE/UHMW CHEVRONS), MX1231UC (UHMW U-CUP)
MX1231 Bare Pump
Assemblies
Patent 7,603,855
AX140S Air Motor Assembly
pages 8-14
SPECIFICATIONS
Ratio:
Maximum air inlet pressure:
Maximum fluid pressure:
Displacement per cycle:
Output @ 60 cycles/min:
Air consumption @ 20 cycles/min:
Maximimum recommended
continuous cycle rate:
Air inlet connection:
Fluid inlet connection:
Fluid outlet connection:
Sound level:
Weight:
FX12 Fluid Pump Assembly
pages 15-22
31:1
8 bar [116 psi]
248 bar [3596 psi]
72 cc [2.4 oz]
4.3 L /m [1.2 gal/m]
498 LPM [17.6 SCFM]
20 cycles/min
3/8" BSP(f)
3/4" NPS(m)
3/8" BSP(m) and 3/8" NPS(m)
97.3 dB
15.6 kg [34.4 lbs]
77-2924
page 1 of 24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX1231 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Binks MX1231 Series

Summary of Contents for Binks MX1231 Series

  • Page 1 MX1231 Bare Pump Assemblies Models: MX1231PL (PTFE/LEATHER CHEVRONS), MX1231PP (PTFE CHEVRONS), MX1231PU (PTFE/UHMW CHEVRONS), MX1231UC (UHMW U-CUP) Patent 7,603,855 AX140S Air Motor Assembly FX12 Fluid Pump Assembly pages 8-14 pages 15-22 SPECIFICATIONS Ratio: 31:1 Maximum air inlet pressure: 8 bar [116 psi] Maximum fluid pressure: 248 bar [3596 psi] Displacement per cycle:...

  • Page 2: Read The Manual

    IT IS ThE RESPONSIBIlITy OF ThE EMPlOyER TO PROvIdE ThIS INFORMATION TO ThE OPERATOR OF ThE EqUIPMENT. FOR FURThER SAFETy INFORMATION REGARdING BINKS ANd dEvIlBISS EqUIPMENT, SEE ThE GENERAl EqUIPMENT SAFETy BOOKlET (77-5300). 77-2924 page 2 of 24...

  • Page 3: General Warnings

    2. Periodically inspect all hoses for leaks parts in the pump. Consult your BINKS 2. Make sure the pump is grounded. and/or abrasions and tighten all representative for pump materials of NEVER operate the unit when it is on connections before use.
  • Page 4 hAzARd CAUSE SAFEGUARdS EXPlOSION STATIC ELECTRICITY 1. If installing this equipment in a potentially explosive atmosphere, check the ATEX equipment category and Use of this equipment in temperature ratings meet the requirements for the a potentially explosive zoned area. atmosphere. 2.
  • Page 5 MX1231 BARE PUMP ASSEMBlIES ITEM MX1231Pl MX1231PP MX1231PU MX1231UC PART NUMBER dESCRIPTION qTy. qTy. qTy. qTy. AX140S AX140S AIR MOTOR ASSEMBLY 0115-010114 □ SOCKET HEAD CAP SCREW 0115-010113 □ LOCKING CLIP 01115-010135 PUMP TIE ROD FX12PL FX12 FLUID PUMP ASSEMBLY (PTFE/LEATHER) FX12PP FX12 FLUID PUMP ASSEMBLY (PTFE) FX12PU...
  • Page 6 MX1231 BARE PUMP ASSEMBlIES – MAINTENANCE MAINTENANCE SyMBOlS ITEM NUMBER MAINTENANCE ORDER (Reverse for assembly) PETROLEUM JELLY THREAD SEALANT (PTFE tape) 77-2924 page 6 of 24...
  • Page 7 MX1231 BARE PUMP ASSEMBlIES – TROUBlEShOOTING PROBlEM CAUSE SOlUTION Pump will not start No compressed air. Check compressed air supply. Spray tip is blocked. Clean or replace the spray tip. Erratic operation of air Worn poppet assemblies. Replace the poppet assemblies. motor, air motor stops Worn or dirty spool and sleeve Clean or replace the spool and sleeve...

  • Page 8: Specifications

    AX140S Air Motor Assembly Patent 7,603,855 SPECIFICATIONS Maximum air inlet pressure: 8 bar [116 psi] Maximimum recommended 20 cycles/min continuous cycle rate: Air consumption @ 20 cycles/min: 498 LPM [17.6 SCFM] Air inlet connection: 3/8" BSP(f) Piston Diameter: 140 mm [5.5 in] Stroke Length: 75 mm [3.0 in] 77-2924...
  • Page 9 AX140S AIR MOTOR ASSEMBly MAINTENANCE SyMBOlS ITEM NUMBER MAINTENANCE ORDER (Reverse order for assembly) PETROLEUM JELLY/GREASE THREAD SEALANT (PTFE tape) • Parts are included in 0115-010301 Air Motor Repair Kit. + Parts are included in 0115-010226 Air Motor Valve Repair Kit. L Parts are included in 0115-010302 Air Motor Seal Kit.
  • Page 10 AX140S AIR MOTOR ASSEMBly ITEM PART NUMBER dESCRIPTION qTy. 0115-010023 EXHAUST COVER SCREEN 0115-010024 N FLAT HEAD COUNTER SUNK CAP SCREW 0115-010022 EXHAUST COVER 0115-010073 N BUTTON HEAD CAP SCREW 0115-010019 QUICK EXHAUST VALVE CAGE 0115-010021 •+◊ O-RING 0115-010020 •+ DIAPHRAGM 0115-010026 N BUTTON HEAD CAP SCREW...
  • Page 11 AX140S AIR MOTOR ASSEMBly – MAINTENANCE MAINTENANCE SyMBOlS ITEM NUMBER MAINTENANCE ORDER (Reverse order for assembly) PETROLEUM JELLY /GREASE THREAD SEALANT (PTFE tape) 77-2924 page 11 of 24...
  • Page 12 AX140S AIR MOTOR ASSEMBly – MAINTENANCE MAINTENANCE SyMBOlS ITEM NUMBER MAINTENANCE ORDER (Reverse order for assembly) PETROLEUM JELLY /GREASE THREAD SEALANT (PTFE tape) 77-2924 page 12 of 24...
  • Page 13 AX140S AIR MOTOR ASSEMBly – MAINTENANCE MAINTENANCE SyMBOlS ITEM NUMBER MAINTENANCE ORDER (Reverse order for assembly) PETROLEUM JELLY/GREASE THREAD SEALANT (PTFE tape) DANGER You are in the presence of magnetic fields which may interfere with the operation of certain pacemakers. CAUTiON NOTE Take care when handling the magnets (14).
  • Page 14 AX140S AIR MOTOR ASSEMBly – TROUBlEShOOTING PROBlEM CAUSE SOlUTION Pump will not start No compressed air. Check compressed air supply. System is blocked. Clear the blockage. Erratic operation of air Worn poppet assemblies. Replace poppet assemblies. motor, air motor stops Worn or dirty spool and sleeve Clean or replace the spool and sleeve assembly.
  • Page 15 FX12 Fluid Pump Assemblies Models: FX12PL (PTFE/Leather), FX12PP (PTFE), FX121PU (PTFE/U-Cups), FX12UC (U-Cups) SPECIFICATIONS Maximum fluid pressure: 248 bar [3596 psi] Displacement per cycle: 72 cc [2.4 oz] Output @ 60 cycles/min: 4.3 L /m [1.1 gal/m] Fluid inlet size: 3/4"...
  • Page 16 FX12 FlUId PUMP ASSEMBlIES (ChEvRON PACKINGS) Models: FX12PL (PTFE/Leather), FX12PP (PTFE), FX12PU (PTFE/UHMW) • Parts are included in Repair Kits + Parts are included in Seal Kits 0115-010269 FX12 ChECK vAlvE ASSEMBly MAINTENANCE SyMBOlS ITEM NUMBER MAINTENANCE ORDER (Reverse for assembly) PETROLEUM JELLY THREAD SEALANT (PTFE tape)
  • Page 17 FX12 FlUId PUMP ASSEMBlIES (ChEvRON) Models: FX12PL (PTFE/Leather), FX12PP (PTFE) ITEM FX12Pl FX12PP FX12PU PART NUMBER dESCRIPTION qTy. qTy. qTy. 0115-010232 FX12 SOLVENT CUP 0115-010294 SIGHT GLASS 0115-010231 •+ O-RING 0115-010141 FX12 UPPER PACKING RETAINER 0115-010205 PUMP ADAPTER PLATE 0115-010143 •+ FX12 PUMP TUBE SEAL 0115-010261 •+ FX12 UPPER PACKING SET (PTFE/LEATHER)

  • Page 18: Disassembly Order

    FX12 FlUId PUMP ASSEMBlIES (U-CUPS) Model: FX12UC • Parts are included in 0115-010305 Repair Kit + Parts are included in 0115-010304 Seal Kit 0115-010269 MAINTENANCE SyMBOlS FX12 ChECK vAlvE ASSEMBly ITEM NUMBER DISASSEMBLY ORDER (Reverse order for assembly) PETROLEUM JELLY / GREASE THREAD SEALANT (PTFE tape) 77-2924...
  • Page 19 FX12 FlUId PUMP ASSEMBlIES (U-CUPS) Model: FX12UC ITEM PART NUMBER dESCRIPTION qTy. 0115-010232 FX12 SOLVENT CUP 0115-010294 SIGHT GLASS 0115-010231 • + O-RING 0115-010230 • SPACER 0115-010161 • + FX12 UPPER U-CUP SEAL 0115-010229 FX12 UPPER U-CUP RETAINER 0115-010205 PUMP ADAPTER PLATE 0115-010143 •...
  • Page 20 FX12 FlUId PUMP (ChEvRONS) – MAINTENANCE Models: FX12PL (PTFE/Leather), FX12PP (PTFE), FX12PU (PTFE/UHMW) MAINTENANCE SyMBOlS MAINTENANCE ORDER (Reverse for assembly) PETROLEUM JELLY THREAD SEALANT (PTFE tape) UHMW (2x) UHMW (2x) if applicable if applicable 77-2924 page 20 of 24...
  • Page 21 FX12 FlUId PUMP (U-CUPS) – MAINTENANCE Model: FX12UC MAINTENANCE SyMBOlS MAINTENANCE ORDER (Reverse for assembly) PETROLEUM JELLY THREAD SEALANT (PTFE tape) 77-2924 page 21 of 24...
  • Page 22 FX12 FlUId PUMP ASSEMBlIES – TROUBlEShOOTING PROBlEM CAUSE SOlUTION Material in solvent cup Worn or dirty upper packings. Replace or clean upper packings as necessary. Pump does not stop on the Worn or dirty lower ball check. Replace or clean the parts as necessary. down stroke Pump does not stop on the Worn or dirty upper ball check.
  • Page 23 ACCESSORIES FOR yOUR MX1231 BARE PUMP TROLLEY ASSEMBLY FLUID FILTER (100 MESH) BRACKET 0115-010186 0110-009130 0115-010179 Service Bulletin 77-2920 Service Bulletin 77-2920 SIPHON KITS AIR CONTROLS LUBRICATING OIL FOR 0115-010236 20 L (20 MESH) 0115-010180 (Air Assist) FX-12 FLUID PUMP 0115-010381 200 L (30 MESH) 0115-010198 (Airless) 0114-009433...

  • Page 24: Warranty

    This product is covered by Binks’ 5 Year Limited Warranty. Binks European Sales and Service Listing: www.itwifeuro.com ITW Industrial Finishing Binks has authorized distributors throughout the world. For technical assistance or the distributor nearest you, see listing below. ITW Surfaces et Finitions: 163-171 Av des Auréals...

This manual is also suitable for:

Mx1231plMx1231ppMx1231puMx1231ucFx12 seriesAx140s ... Show all

Table of Contents