How To Operate The Dual Alarm Unit - Furuno IC-350 Operator's Manual

2.5

How to Operate the Dual Alarm Unit

You can operate No.2 alarm unit from remote location by dual alarm unit installation. When the
No.2 alarm unit is installed, do the operation as follows.
Purpose
Turn the power on
Resceive distress signal
Send distress signal
Dimmer control
Diagnose the system
External alarm output
Communication error
Both equipment can turn on first.
Two units resceive the signal simulteneously and lights the lamps and
buzzer alarm occurs on each equipment.
Press the DISTRESS button on one of the two alarm units. The earlier
pressing has effect to send a distress signal.
Independently.
Independently.
Both equipment ports are enabled.
If the communication is failed between No.2 and No.1 alarm unit, No.2
alarm unit alert is genarated. The communication error between No.1
alarm unit and radio transceivers is same as only one alarm unit instal-
lation. The alarm buzzer can be stopped with short press of mute alarm
buttom from No.2 alarm unit.
11
Operation
2. OPERATION