Maintenance; How To Clean The Equipment - Furuno IC-350 Operator's Manual

3.

MAINTENANCE

3.1 Maintenance
Check the points shown below once a month to help keep the equipment in good condition.
Item
Cables
Screws on chassis
Ground
Voltage
3.2

How to Clean the Equipment

Remove dust from the equipment with a soft and dry cloth. To remove dirt, use a moist cloth. Do
not use chemical cleaners as those types of cleaners can remove paint and markings.
NOTICE
Do not apply paint, anti-corrosive
sealant or contact spray to coating
or plastic parts of the equipment.
Those items contain organic solvents
that can damage coating and plastic
parts, especially plastic connectors.
Check cables for damage.
Check that screws are correctly fastened.
Check for corrosion.
Check that the voltage is within the rating of the equipment.
(The voltage at the power terminal is 20.4 - 31.6 VDC)
Check point
12