Specifications - Furuno IC-350 Operator's Manual

FURUNO
IC-350 is a GMDSS Distress Alarm Panel that is normally installed at conning position. Pressing
the button on the panel transmits the distress alert. When the incoming distress or urgency call is
received, the panel generates audible and visible alarms. The buttons on panel are clearly and
visibly identified.
1 GENERAL
1.1 Indication of receive
1.2 Nature of distress
Distress button
Audible alarm
1.3 External alarm
Alarm 1
Alarm 2
2 INTERFACE
2.1 I/O port
SSB radiotelephone
Marine VHF radiotelephone
Inmarsat-C MES
Navtex receiver
External alarm
2.2 Control panel
2.3 LED indication
2.4 Speaker
3 POWER SUPPLY
3.1 Alarm unit
3.2 AC/DC power supply unit (PR-240, option)
3.3 Rectifier (PR-62, option) 100/110/220/230 VAC, 1 phase, 50/60Hz
4 ENVIRONMENTAL CONDITION
4.1 Ambient temperature
4.2 Relative humidity
4.3 Degree of protection
4.4 Vibration
5 COATING COLOR
SPECIFICATIONS OF ALARM UNIT
IC-350
LED illumination and audible alarm generated when distress
callings are received (SAR message for Navtex receiver)
LED illumination independently for each equipments
Synchronized with LED behavior (continuous/ intermittent/ halt)
Distress alert indication, Photo-MOS relay contact, normal close
Max. 80 mA, 50 V
Incoming indicator (IC-303-DSC) for SSB radiotelephone
FS-1575/2575/5075
FM-8900S (2 sets)
FELCOM18
NX-700A/B
General: 1 port, DSC: 1 port
TEST/ ALARM MUTE/ DIMMER/ DISTRESS
DISTRESS call, 6 sets
Receiving alarm/ Audible alarm
24 VDC: 0.15A
-15°C to +55°C
95% at 40°C
Front panel: IP22
IEC 60945
N2.5
SP - 1
100-115/200-230VAC, 1 phase, 50/60Hz
IC-350
E5665S01C
130319