Furuno IC-350 Operator's Manual page 13

How to connect the cables
The lid at the bottom of the chassis seals the bottom cable entrance. To lead in cables through
the bottom of the chassis (rather than the rear), unfasten two screws to remove the lid and use
the lid to cover the rear panel cable entrance.
Power Cable
To SSB Radiotelephone
To No.2 Alarm unit (IC-350)
To No. 1 VHF Radiotelephone
To No. 2 VHF Radiotelephone
The dashed line indicates optional equipment.
Cable shield
Fix crimp-on lugs
S102 DIP SW
with screws.
Not used
To External Alarm
To NAVTEX Receiver
To No. 2 Inmarsat C MES
To No. 1 Inmarsat C MES
5
1. INSTALLATION
Cable entrance lid
At bottom of unit
Cable clamp
Set sheath of cables
in cable clamp.