Table of Contents
Advertisement
3. Appliance control knobs - refitting
Read the section "important safety information" first
Do not remove the appliance control knobs when removing the cover of the
appliance, if they have been inadvertently removed, then the following procedure will
allow them to be refitted.
3.1. Ensure that the clear plastic
dripshield is in place over both
spindles with the label facing
forward.
3.2. Fit left hand knob on to locating
splines on left-hand spindle.
3.3. Turn right-hand spindle
(temperature) fully anticlockwise.
3.4. Fit right-hand knob on to splines so
that pointer is at 7 o' clock.
35
Advertisement
Table of Contents
