Advertisement
3.4 Connecting sensors (PNP inputs)
Use cable type NEBU-... or KM8-M8-GSGD-... and plug
with union nut and M8x1 thread for connecting sensors.
Fasten the plugs/sockets with the aid of the union nut in
order to prevent unintentional loosening, e.g. due to
shock. Seal unused sensor connections with the protective
caps type ISK-M8. Only in this way can you comply with
protection class IP65.
Note
– The inputs have been designed in accordance with
IEC 1131-2 type 02.
– The inputs are short-circuit proof. In the event of a
short circuit the slave will be switched off. The
AS-Interface master then regards this slave as
missing. The slave reports back as functioning once
the short circuit has been eliminated.
1
Inputs of the first
slave
2
Inputs of the second
slave
3
Pin allocation:
1: US+
3: US–
4: Input Ix
Festo CPV-ASI-8E8A-Z-CE 2018-11b English
0
1
2
3
4
5
6
1
2
7
4
3
1
3
9
Advertisement
