Installation Requirements; Tools And Parts; Location Requirements - Whirlpool 1187361 Use And Care Manual

WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Tools and Parts

Check that you have everything necessary for correct installation.
Proper installation is your responsibility.
Tools needed
Safety glasses
Flat-blade and Phillips
screwdrivers
in. nut driver
in. wrench
Parts supplied
Check that all parts are included in parts package.
Air conditioner installation
6
1 2
3
1. 1 window-lock bracket
2. 6 - #8 x in. pan-head screws
3. 3 - #8 x in. round-head screws
4. 3 - #10 x in. pan-head screws
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Scissors
Tape measure
Level
Drill
in. or smaller drill bit
7
8
5
4
5. 2 side curtains
6. 1 top channel
7. 1 foam seal
8. 2 side curtain frames
Do not use an extension cord.
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
SMART-MOUNT ™ tray assembly installation
1
2
3
4
5 7
6 8
1. 1 tray back
2. 1 tray center
3. 2 tray sides
4. 2 support legs
5. 4 - #8 - 18 x in. hex-
head screws

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Proper installation is your responsibility. Make sure you have
everything necessary for correct installation.
The location should provide:
Grounded electrical outlet within 4 ft (122 cm) of where
the power cord exits the air conditioner.
NOTE: Do not use an extension cord.
Free movement of air to rooms to be cooled.
A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
Adequate wall support for weight of air conditioner. Air
conditioner weighs 80 lbs (36.3 kg) to 125 lbs (56.7 kg).
9 10
6. 4 flat washers
7. 4 lock washers
8. 4 hex nuts
9. 4 carriage bolts
10. 2 - #10 - 12 x 1 in.
slot-head wood screws
3