Table of Contents
Advertisement
Available languages
Available languages
Air Conditioner Installation
EN
Installer: Leave Use and Care Guide with the homeowner.
Homeowner: Keep Use and Care Guide for future reference and for local
electrical inspector's use, if required.
Location requirements
IMPORTANT: Observe all governing codes and
ordinances.
Check the location where air conditioner will be installed.
Proper installation is your responsibility. Make sure you
have everything necessary for correct installation.
The location should provide:
• Grounded electrical outlet within 4 ft (122 cm) of the
window. Do not use an extension cord.
• Free movement of air to rooms to be cooled.
• A large enough opening for the air conditioner.
Installation parts are supplied for double-hung
windows.
• Adequate wall support for weight of air conditioner. Air
conditioner weighs 56 lbs (25 kg) to 80 lbs (36 kg).
Do not install the air conditioner in an area where the
front panel will be exposed to heat sources that will raise
the panel surface temperature above 120°F (50°C).
Air Conditioner Size
5000-6000
Btu/h
Tools needed
A. Gloves
B. Flat-blade and Phillips screwdrivers
C. Scissors
D. Drill and 3/32 in. or smaller bit
E. Safety glasses
F. Tape measure
G. Level
4
A
B
25" to 38"
16"
(63.5 cm to
(40.6 cm)
96.5 cm)
Window opening measurements
A
B
E
A
B
C
D
G
F
Advertisement
Chapters
Table of Contents
