APS GR18GEC00U Installation Instruction

GR18GEC00U
Part#
Item Part Name
1 Grille

Parts List

2 Stud
3 Lock Nut
Install Notes: Overlay
Description
Step
1 Identify the grille & hardware with parts list.
Pop hood, remove the black plastic cover (on top of OEM grille / front panel) from vehicle. This will allow access to the
2 rear of the grille shell.
Option: If necessary, according to the factory menu, remove the front bumper (with OEM grille) from vehicle.
According to the factory menu, remove
3
the OEM grille shell from vehicle.
Secure the studs to the welded nut on the
4
rear of the grille.
Center the grille into the opening on the
factory front bumper. Be sure the studs
are through the factory holes on the front
5 bumper.
*if necessary, drill holes on the lip of the
front bumper according to the position of
the studs.
The instruction here is for your reference only. You may need to bend the grille a little bit to
adjust to fit. We strongly recommend the professional installer for best result.
Please use masking tape and tape the OEM grille shell along the edge to protect your vehicle during
installation.
We are not responsible for any damage caused by the installation. Thank you for choosing our product!
Grille Installation Instruction
Application
QTY Description
1 SS./ AL
10 6-32×1 1/2"
10 6-32
×
Replacement
05~10 Chrysler 300/300C
Item Part Name
4 Washer
5 Plastic Body Retainers
6


Drill
6-32×1 1/2"
QTY
10
For replacing the OEM
6
Retainers

Cut
illustration
Description
6#