3.2 Installation
3.2.1 Installing and Removing the SC-HG1-ETC
■ Mounting on a DIN rail
Hook the rear of the mounting part onto the 35-mm-wide DIN rail.
1.
While pressing down on the rear of the mounting part, insert the front of the mounting part
2.
into the DIN rail.
■ Removing from a DIN rail
Grasp the product and push forward.
1.
2.
Lifting the front of the product removes it from the DIN rail.
Note
If you attempt to lift the front without pushing the product forward, you will break the hook on the
rear of the mounting part.
WUME-SCHG1ETC-2
2
35-mm-wide DIN rail
1
2
1
3.2 Installation
3-3