Table of Contents
Advertisement
Safety instructions | SYDFED-2X, SYDFED-3X, SYHDFED-1X
Electrical Code (NEC), National Electrical Manufacturers Association (NEMA) as
well as regional engineering regulations.
• If you use the SY(H)DFED control system in a potentially explosive atmosphere.
2.4
QUALIFICATION OF PERSONNEL
The activities described in this documentation require basic knowledge of
mechanics, electrics and hydraulics as well as knowledge of the appropriate
technical terms. In order to ensure safe use, these activities may only be carried
out by an expert in the respective field or an instructed person under the direction
and supervision of an expert.
Experts are those who are able to recognize potential hazards and apply the
appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant requirements pertaining
to the work to be undertaken. An expert must observe the relevant specific
professional rules and have the necessary expert knowledge.
Expert knowledge means for example for hydraulic products:
• Reading and completely understanding hydraulic circuit diagrams,
• in particular, completely understanding the correlations regarding safety
equipment and
• knowledge of the function and structure of hydraulic components.
Bosch Rexroth offers training courses that support your qualification in specific
fields. You can find an overview of training contents on the Internet at: http://
www.boschrexroth.com
2.5
GENERAL SAFETY INSTRUCTIONS
• Observe the valid regulations on accident prevention and environmental
protection.
• Observe the safety regulations and provisions of the country in which the
product is used/applied.
• Exclusively use Rexroth products in technically perfect condition.
• Observe all notices on the product.
• Persons who install, commission, operate, demount or maintain Rexroth
products must not consume any alcohol, drugs or pharmaceuticals that may
affect their ability to respond.
• Only use accessory and spare parts released by the manufacturer in order to
rule out personnel hazards arising from unsuitable spare parts.
• Comply with the technical data and ambient conditions specified in the product
documentation.
• If unsuitable products are installed or used in safety-relevant applications,
unintended operational states can occur in these applications, which can cause
personal injury and damage to property. Therefore, use the product only in
safety-relevant applications, if this use is expressly specified and permitted in
the documentation of the product.
• You may commission the product only when it has been established that the
final product (for example, a machine or system), in which the Rexroth product
is installed, complies with national regulations, safety regulations and standards
relevant for the application.
RE 30017-B, Edition 11.2021, Bosch Rexroth AG
11/96
Advertisement
Table of Contents
