Setting A Measurement Configuration; Defining A Measurement Configuration - Larson Davis Spartan 730 Reference Manual

Section 3
In this module:

3.1 Defining a Measurement Configuration ..................................................... 30

3.1.1 Activating Options for a Measurement
3.2 Defining Exceedance Triggers ..................................................................... 35
3.2.1 Setting Exceedance Trigger Levels On the Dosimeter
3.2.2 Customizing Exceedance Trigger Settings
3.3 Setting a Visual Alarm on the Spartan 730 ................................................. 38
3.3.1 Enabling Dosimeter 1 Alarm 1
3.3.2 Selecting Alarm Options
3.4 Setting a Measurement Timer .................................................................... 42
3.4.1 Setting a Timed Stop Measurement Timer
3.4.2 Setting a Daily Measurement Timer
3.4.3 Disabling a Measurement Timer
3.5 Setting the Measurement Configuration in G4 .......................................... 45
3.1 Defining a Measurement Configuration
Spartan 730/730IS Dosimeter Manual

Setting a Measurement Configuration

T
he Spartan 730 dosimeter measures sound, and then calculates the
current noise exposure according to your chosen configurations for
Dosimeter 1, 2, 3, and 4.
These 4 virtual dosimeters calculate noise exposure based on a variety
of international noise exposure standards. You may use the preset
configurations as listed, customize one or more options of a preset, or
create a completely custom configuration. The following preset
configurations are available:
• OSHA-HC
• OSHA-PEL
• NIOSH
• ACGIH
• ISO 9612
• Custom
In this section, navigate the measurement configuration screens on the
dosimeter to prepare the dosimeter for a measurement. You can also
use the G4 LD Utility or LD Atlas app to create a configuration when you
connect your dosimeter to your PC or to a mobile device. For more
information on this, see 3.5 "Setting the Measurement Configuration
in G4" on page 45.
Defining a Measurement Configuration 30