Driving Position; Parking; Bridge Plates And Dock Boards; Lifting The Machine - CombiLift C3000CB Manual

Combilift Ltd
3.4:

Driving Position

 Only operate controls from the correct driving position and do not operate
any control until you are certain of its function.
3.5:

Parking

 Apply parking brake by pressing the red button.
 Ensure that the direction control switch is set to neutral.
 Lower the forks fully.
 Park clear of aisles, doorways, stairways and fire points and ensure that
the truck will not obstruct other traffic.
3.6:

Bridge Plates and Dock Boards

 Bridge plates and dock boards must have an adequate safety factor to
support a loaded truck and be secured when in use to prevent accidental
movement.
 Do not exceed the maximum permissible load, which must be clearly
marked on all bridge plates and dock boards.
 The sides of bridge plates, and where possible dock boards, must be
raised to minimise the possibility of the truck being driven over the edge.
 The surface of the above equipment must be of a slip resistant substance.
 Drive slowly when crossing bridge plates and dock boards.
3.7:

Lifting the Machine

 Lift the machine only when necessary.
 Check machine weight before lifting
 Use only the two lifting points on the mast and ensure that the mast is
tilted back before lifting.
C2500CB-OM-EN-11
C2500-C3000CB O&S Manual
3-2