Moving Off; Changing Direction Without Changing Mode; Changing Into Sideward Mode; To Change Back To Forward Mode - CombiLift C3000CB Manual

Combilift Ltd

2.9: Moving Off

 Ensure that the forks are as low as possible.
 Select forward or reverse, or, right or left with Direction Control switch.
 Look around and when all is clear release parking brake and apply light
pressure to the accelerator pedal until the truck begins to move.
 Increase pressure on accelerator pedal to increase truck speed.
The Combilift has a maximum ground speed of 10km/hr. Always adhere to all speed

2.10: Changing Direction without Changing Mode

 Remove foot from the accelerator pedal.
 Gradually apply inching pedal to halt the truck.
 Select change of direction and gradually increase pressure on accelerator
until truck is travelling at desired speed.

2.11: Changing Into Sideward Mode

 Bring the truck slowly to a halt by depressing inching pedal fully.
 Ensure that all observers stand clear of the truck.
 Move the direction control switch from forward/reverse into the required
sideward direction. The wheels will automatically align themselves at right
angles to the forks.
 Wait until wheels are locked and dash light is illuminated before moving
When in sideward mode the front wheels steer the truck while the back wheel

2.12: To Change Back to Forward Mode

When in sideward mode, turn the steering completely anti-clockwise at least
once. This ensures correct alignment of the front wheels in forward
 Bring the truck slowly to a halt by depressing the inching pedal fully.
 Ensure all observers stand clear of truck.
 Move the direction control switch from left/right into the required forwards
direction.
 Wheels will automatically align themselves parallel with the forks.
 Wait until wheels are locked and dash light is illuminated before moving.
When in forward mode the back wheel steers the truck, while the front wheels
C2500CB-OM-EN-11
NOTE
limits in the area which the truck is operating
NOTE
remains fixed
NOTE
mode.
NOTE
remain fixed .
C2500-C3000CB O&S Manual
2-5