Combilift Ltd
2.4: Serial Plate
The Serial Plate is the Metal Disc that is fixed to the Combilift in the cabin of
every machine. It is engraved with a number of details, which are required by
law. These are:
The Trucks serial Number
Its rated Capacity
It's unladen weight
It's date of manufacture
The manufacturers name and address.
This plate should not be removed by anyone. If lost order a replacement from
Combilift immediately.
2.5: Operator Qualification
The Combilift must NOT be operated by any other individual other than those
who have been trained to do so. Training should be carried out either by
Combilift Driver training personnel or a Combilift authorised training
organisation. Details of these organisations can be acquired from Combilift
Ltd.
2.6: Operator Responsibilities
Always ensure that the truck is in good working order before commencing
work. This is achieved by performing the Daily inspection of the Combilift. The
daily inspection is to be carried out at the beginning of the working day or at
the start of each shift.
It is the operators' responsibility to perform the daily inspection before each
shift. The Inspection and how it should be conducted is covered later in this
publication.
Unless authorised and trained to do so, the operator must not attempt any
repairs, but report defects immediately. When authorised to perform
maintenance work and/or repairs, ALWAYS ensure that the appropriate
Health and Safety regulations are strictly adhered to.
Report any operational problems that may develop, (damaged pallets, ground
surface breaking up etc.) which could not only reduce safety but also cause
damage to the truck.
Never attempt to exceed your truck's handling capacity and take all
precautions to ensure safety of others as well as yourself. Stop working and
switch off if for any reason, in your opinion, the truck becomes unsafe or
defective.
C2500CB-OM-EN-11
C2500-C3000CB O&S Manual
2-3