Load Chart - CombiLift C3000CB Manual

Combilift Ltd
To keep the lift truck stable, the centre of gravity must stay within the area of
the lift truck represented by a triangle drawn between the three wheels. If the
centre of gravity moves forward of the triangle front, the lift truck will tip
forwards. If it moves outside the right or left of the triangle the truck will tip to
the side.

2.3: Load Chart

The rated capacity of the truck is illustrated
on a load chart located inside the cabin. The
load centre is determined by its centre of
gravity and is measured from the front face
of the forks to the centre of gravity of the
load. It is assumed that the centre of gravity
in the vertical direction is no greater than the
specified horizontal load centre.
It is the responsibility of the operator to determine that the weight of the load to
be handled is not greater than the capacity shown on the load chart. The
operator must not handle any load that is greater than the capacity shown.
C2500CB-OM-EN-11
C2500-C3000CB O&S Manual
MAXIMUM STACKING CAPACITY ON A FIRM LEVEL SURFACE
COMPLYING WITH 89/392/EEC
?Kg
5.5
?Kg
4.5
?Kg
?Kg ?Kg
2.5
?Kg
600 700 800
LOAD CENTRE (mm)
?Kg
?Kg
?Kg
900 1000
2-2