Connections On The Drive Module - ABB MultiMove Applications Manual

2.1.3 Connections on the drive module

Already connected at delivery
When a MultiMove system is delivered from ABB, the Ethernet cable and the safety
signal cable are already connected to the drive module. You only need to know
how these cables are connected if you are going to change the hardware
configuration or replace parts.
Connect the cables from the control module
xx0600002787
A
B
Connect the Ethernet cable to the Ethernet connection marked Computer module
link. Connect the safety signal cable according to
page
Application manual - MultiMove
3HAC050961-001 Revision: E
B
Ethernet connection
Contactor interface board
26.
© Copyright 2004-2018 ABB. All rights reserved.
2 Installation
2.1.3 Connections on the drive module
A
Safety signal connection on
Continues on next page
25