Comrex ACCESS MultiRack Product Manual page 74

FIgure 58 bulk ActIons
To do this, press the Bulk Action button in the bottom right corner of the Contact List tab (Figure
The three steps to create a Bulk Action are:
1. Choose the type of action to perform.
2. Select the codecs targeted with this change.
3. Identify the Contact List that will be impacted by the change.
Step 1: Choose the Action Type
First, select which of the four types of Bulk Actions to perform (Figure
• ADD codecs to a Contact List;
• REMOVE codecs from a Contact List;
SUBSCRIBE to a Contact List (i.e., have multiple codecs Follow that list);
•
UNSUBSCRIBE from a Contact List (i.e., have multiple codecs stop Following that list).
•
FIgure 59 bulk contAct lIst AssIgnment
Step 2: Select the Target Codecs
Next choose which list of codecs to target with this Bulk Action (Figure
74
59):
60).
58).