Switchboard Server; Alternate Modes - Comrex ACCESS MultiRack Product Manual

remote. A connection attempt will be made whenever the contact is triggered, and will disconnect whenever the
contact is released.

SWITCHBOARD SERVER

Switchboard Enabled - This option enables the use of Switchboard to connect to remote units. (See Making
MultiRack Connections Using Switchboard on
Server.)
Server Address - The Internet URL of your Switchboard server. Default is the server maintained free of charge by
Comrex. If you are running a custom Switchboard server, put the URL or IP address here.
Secure - Enables Switchboard to operate over a secure channel. This option is the default and is recommended
when using the Comrex Switchboard server. If using a custom server, this option must be disabled.
PEER LIST
Under Switchboard Settings, there is an option to open and edit the Switchboard Peer list. This is a static list of
all known codecs on the user's Switchboard list. Most users should not edit this list, but it can be useful to delete
Switchboard peers that have been removed from service.

ALTERNATE MODES

BRIC Normal Settings
• Accept Incoming Connections - This determines if this MultiRack is used for incoming normal IP
connections. If this function is not enabled, MultiRack will only support outgoing calls using BRIC Normal
Mode.
Modem
• Accept Incoming Connections - This allows a MultiRack to listen for and automatically answer incoming
calls.
EBU3266/SIP Settings
• Accept Incoming Connections - This determines whether incoming calls are accepted in EBU3326/SIP
format (used for compatibility with other manufacturers who follow this protocol).
• Incoming Connection Profile - This allows users to select whether SIP calls will take place using a specific
encoding algorithm. Note: If this option is chosen, only calls using the selected algorithm are allowed.
Default is "None".
• Use SIP Proxy - This option determines whether the SIP function is "registered" to a SIP cloud server. If
this setting is enabled the address, user name, and password for the proxy must be added in the relevant
fields.
• SIP Proxy Address - IP address or URL of the SIP proxy used.
• SIP Username - Username for logging into registered SIP server; provided by the SIP service provider.
• SIP Password - Password for logging into registered SIP server; provided by the SIP service provider.
Page 62 for more information on using the Switchboard Traversal
41