Updating Firmware Using Device Manager - Comrex ACCESS MultiRack Product Manual

FIgure 9 network conFIgurAtIon

UPDATING FIRMWARE USING DEVICE MANAGER

While Device Manager is open and synced to a codec, it's a good time to check to see if an update is available for
the product.
To do this, select the Firmware tab, shown in Figure 10 below.
The unit's current firmware and the most recent version of firmware for the unit are listed at the top of the tab (1
in Figure 10). If the device isn't running the latest version of firmware, click the "Get Latest Version" button (2 in
Figure 10) and download it. (If the unit's Firmware is current, the button will be grayed out.) Next, select "Update
Device" (3 in Figure 10), choose the .upd file just downloaded and click OK, and Device Manager will then update
the unit's firmware.
25