Network Locations; Wlan Adapter - Comrex ACCESS MultiRack Product Manual

IP Type to open a drop down selection screen. This will give users the option to change the "Default" Network
Location to Static IP, DHCP, or Gateway IP types as shown in Figure 28.
FIgure 28 ethernet port deFAult settIngs

NETWORK LOCATIONS

While the "Default" setting may work for many users in a stationary environment, MultiRack includes Network
Location settings for configuring different connections to different Networks known as "Locations". This allows for
on-the-fly connection to different Networks by storing connection and configuration data as a Name-able Location.
To do this, select the New Location under the Network Location header. Change the name of the Location to
something memorable and then select IP Type (Figure 29). This controls the IP address type amongst DHCP, Static,
and Gateway settings. If selecting a Static IP address, make certain to enter the unit's new IP address, its Netmask,
and its Gateway Address, as well as at least one DNS Server Address.
FIgure 29 ethernet port deFAult settIngs
Once a Network Location has been added, it can be easily implemented through the Active Network Location
selection in the Adjust Device Settings.

WLAN ADAPTER

While the previous section detailed use of Ethernet Port connectivity with MultiRack, users additionally have the
option to use WiFi and 4g cellular modems in making connections.
50