Table of Contents
Advertisement
Mounting
m
m
fig..1
fig. 2
Head valve
f
Liquid end
f
f
Intake valve
fig. 3
A
A
fig. 4
DN pipe
DN pump valve
DN pump valve
fig. 5
Page 8
3
Mounting
IMPORTANT
•
Mount the metering pump upright with the feet on a horizontal base. Refer to the
corresponding data sheets for the dimensions (m) of the securing holes.
•
The frame or the foundation for mounting the pump must be designed such as to
DN
ensure the unit is free of vibration and stable.
•
Install pump at convenient operating level and mount such that the valves are vertical:
head valve always at top and intake valve always at bottom.
•
Ensure adequate clearance (f) in area of liquid end as well as intake valve and head
valve so that these parts can be easily removed if required.
•
Set up the pump such that the stroke length adjustment, indicator scale A, oil level
indicator, oil filler and drain plugs as well as the valves are easily accessible for
servicing.
•
Ensure nominal diameters of pipes and installed fittings are the same size or larger
than the nominal diameters of the pump valves (intake and head valves).
ProMinent
ProMinent
®
®
Advertisement
Table of Contents
