F99 Reset To The Default Setting - SMC Networks ZK2-ZSV-A Series Operation Manual

■[F99] Reset to the default setting
If the setting of the pressure switch becomes unknown, the default setting can be restored.
<Operation>
Press the or
Reset to the default setting
Set the display [ON] by pressing the
then press the
seconds or longer.
All settings are returned to the
default values. Return to
function selection mode.
button in function selection mode to display [F 99].
Press the button.
or
and buttons simultaneously for 5
Setting of [F99] Reset to the default setting completed
Move on to reset to the default setting.
button,
-41-
[oFF] (unused) selected.
Press the button to
confirm selection.
Return to the function
selection mode.
NO.ZK2-OM00501-B