SMC Networks ZK2-ZSV-A Series Operation Manual page 29

<Operation>
Press the or button in function selection mode to display [F 2].
Press the
Setting ON point of the supply pilot valve
Setting OFF point of the supply pilot valve
Set the range in which ON point of the supply pilot valve input is prohibited

1: Selected parameter become effective after pressing the
2: After setting is made valid by the
longer.
3: OFF point (H_2) of the supply pilot valve is automatically corrected by setting the input prohibited range (H_4) of ON point of the
supply pilot valve.
Press the button to set.
or button to change the set points.
Press the button to set.
Press the button to set.
Press the button to set.
[F 2] Setting of OUT2 complete.
button, it is possible to move to measurement mode by pressing the
Move on to setting of pressure.
Move on to the next parameter.
Move on to the next parameter.
Return to function selection mode.
button.
-28-
A
button for 2 seconds or
NO.ZK2-OM00501-B