SMC Networks ZK2-ZSV-A Series Operation Manual page 27

<Operation>
Press the or button in function selection mode to display [F 1].
Check of output mode
Check the set value same as the display shown to the
right, then move on to next setting.
Press the
Setting of reversed output
Press the or
output.
Press the
Setting of pressure
Press the or
adjust pressure setting.
Press the
Setting of hysteresis
Press the or
select hysteresis.
Press the
Press the button.
button to set.
button to select reversed
button to set.
button to
button to set.
button to
button to set.
[F 1] Setting of OUT1 complete.
Move on to the check of output mode.
Move on to setting of reversed output.
Move on to setting of pressure.
Move on to setting of hysteresis.
Return to function selection mode.
-26-
NO.ZK2-OM00501-B