Huawei UPS2000-G-6KRTLL User Manual page 43

UPS2000-G-6KRTLL
User Manual
● If you do not press any button on the UPS control panel, the default screen is displayed after
Table 4-2 Button description
No.
1
2
3
4
Issue 01 (2020-08-06)
NO TE
60s.
Button
ON/MUTE
SELECT
OFF/ENTER
ON/MUTE+SELECT+OFF/ENTER
Copyright © Huawei Technologies Co., Ltd.
Function
● Start the UPS: Press ON/MUTE.
The UPS LCD lights up.
● Start the UPS inverter: Press and
hold ON/MUTE for more than
5s. The UPS inverter starts.
● Stop the buzzer: If there is an
alarm, press and hold ON/MUTE
for more than 2s in non-setting
mode to mute the current alarm.
When the UPS generates a new
alarm, the mute function
becomes ineffective. If you need
to mute the alarm, perform the
mute operation again.
● Go to the previous item: When
the LCD is on, press ON/MUTE
to go to the previous item.
Go to the next item: Press SELECT
in setting mode to go to the next
item.
Go to the setting screen: Press and
hold SELECT for 1s on a non-
setting screen.
● Shut down the UPS: Press and
hold OFF/ENTER for more than
5s. The UPS inverter shuts down.
The UPS transfers to bypass
mode when the mains is
available.
● Confirm: In UPS setting mode,
press OFF/ENTER to confirm
selection.
Restore the initial password: Press
and hold ON/MUTE, SELECT, and
OFF/ENTER at the same time for
3s on the password login screen.
4 Control Panel
37