Table of Contents
Advertisement
26
Sensyflow FMT200-ECO2 THERMAL MASS FLOWMETER | OI/FMT200-ECO2-EN REV. H
10 Dismounting and disposal
Dismounting
WARNING
Risk of injury due to process conditions.
The process conditions, for example high pressures and
temperatures, toxic and aggressive measuring media, can
give rise to hazards when dismantling the device.
•
If necessary, wear suited personal protective equipment
during disassembly.
•
Before disassembly, make sure that the process
conditions do not pose any safety risks.
•
Depressurize and empty the device / piping, allow to cool
and purge if necessary.
Bear the following points in mind when dismantling the device:
•
Switch off the power supply.
•
Disconnect electrical connections.
•
Allow the device / piping to cool and depressurize and
empty. Collect any escaping medium and dispose of it in
accordance with environmental guidelines.
•
Use suited tools to disassemble the device, taking the
weight of the device into consideration.
•
If the device is to be used at another location, the device
should preferably be packaged in its original packing so
that it cannot be damaged.
•
Observe the notices in Returning devices on page 25.
Disposal
Note
Products that are marked with the adjacent symbol
may not be disposed of as unsorted municipal waste
(domestic waste).
They should be disposed of through separate
collection of electric and electronic devices.
This product and its packaging are manufactured from materials
that can be recycled by specialist recycling companies.
Bear the following points in mind when disposing of them:
•
As of 8/15/2018, this product will be under the open
scope of the WEEE Directive 2012/19/EU and relevant
national laws (for example, ElektroG - Electrical
Equipment Act - in Germany).
•
The product must be supplied to a specialist recycling
company. Do not use municipal waste collection points.
These may be used for privately used products only in
accordance with WEEE Directive 2012/19/EU.
•
If there is no possibility to dispose of the old equipment
properly, our Service can take care of its pick-up and
disposal for a fee.
Advertisement
Table of Contents
