Analog Output' Registration Tab - ABB Sensyflow FMT200-ECO2 Operating Instructions Manual

20 Sensyflow FMT200-ECO2 THERMAL MASS FLOWMETER | OI/FMT200-ECO2-EN REV. H
... 6 Commissioning
... Parameter descriptions

'Analog output' Registration Tab

1 'Configure' area, selection of the parameters to be configured via check
box  / .
2 Display of the currently set values
Figure 15: Parameterization program, 'Analog Output' Registration Tab
This tab is used to configure the analog output. For the sake of transparency, both the current and amended values are displayed at
the same time.
• The parameters to be changed should be selected using the check box  and the values changed in the entry field.
The changed values are saved to the sensor using the 'Accept' button.
•
The sensor is restarted and initialized (LED on the transmitter blinks red). No measured values are displayed during initialization.
3 Display of the newly selected values