Philips Avent SCD580 User Manual page 13

temperature
A baby sleeps comfortably at a temperature between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range and an alert.
1 To open the temperature submenu, select 'Temperature' in the menu. Press OK to confirm.
2 Select 'Temp Range' in the temperature submenu and press OK to confirm.
3 Use the + and - buttons to set the minimum temperature range between 10°C/50°F and
19°C/66°F and the maximum temperature range between 22°C/72°F and 37°C/99°F.
Press OK to confirm.
4 Select 'Alert' in the temperature submenu. Press OK to confirm.
5 Choose one of the alert options. The options available are sound only, sound and vibration, vibration
only and display only. Press OK to confirm. The temperature alert symbol appears on the display.
6 Select 'Temp Scale' in the temperature submenu. Press OK to confirm.
7 Select 'Celsius' or 'Fahrenheit' and press OK to confirm. The temperature in the set scale
appears on the display. If the temperature is within the set range, the temperature alert
symbol has two segments.
If the temperature is below or above the set range, the temperature alert symbol on the
,
display has only one segment and flashes. The message 'TOO COLD' or 'TOO HOT' appears
on the display (Fig. 27).
Humidity
Maintaining a healthy humidity level for your baby is important. The optimal humidity
level is between 40% and 60%. You can set a humidity range and an alert.
1 To open the humidity submenu, select 'Humidity' in the menu. Press OK to confirm.
2 Select 'Hum Range' in the humidity submenu and press OK to confirm.
3 Use the + and - buttons to set the minimum humidity range between 20% and 50% and the
maximum humidity range between 51% and 70%. Press OK to confirm.
4 Select 'Alert' in the humidity submenu. Press OK to confirm.
5 Choose one of the alert options. The options available are sound only, sound and vibration, vibration
only and display only. Press OK to confirm. The humidity alert symbol appears on the display.
If the humidity is below or above the set range, the humidity alert symbol and the humidity
,
measured flash on the display. The message 'TOO DRY' or 'TOO HUMID' appears on the
display (Fig. 28).
Cry alert
You can set a cry alert to warn you that the baby is crying.
1 Select 'Cry alert' in the menu with the + and - buttons. Press OK to confirm.
2 When the display shows 'Vibration ON', press OK to confirm. The cry alert indicator appears
on the display.
The cry alert goes off when the sound in the baby room is loud enough to make the fourth
,
sound level light go on. The parent unit vibrates and the message 'Cry alert' appears on the
display for 4 seconds. The cry alert repeats every 8 seconds until the sound becomes less
loud or you deactivate the cry alert (Fig. 29).
3 To deactivate the cry alert, select 'Cry alert' in the menu. When the display shows 'Vibration
OFF', press OK to confirm.
EngliSh
13