Philips Avent SCD580 User Manual page 12

EngliSh
12
activating eco Max mode
1 Select 'Eco Max' in the menu with the + and - buttons and press OK to confirm.
2 When the display shows 'Turn On', press OK to switch on the Eco Max mode.
3 The warning message '!No alert if out of range, OK?' appears on the display. Press OK to
confirm.
Note: The warning message scrolls across the display twice. If you do not press OK, the parent unit leaves
the menu and the Eco Max mode remains off.
The Eco Max indication flashes on the display. The 'link' light flashes green slowly when the
,
baby unit does not transmit any signals to the parent unit (Fig. 24).
When the parent unit receives a signal from the baby unit because radio transmission has
,
been reactivated, the 'link' light turns solid green.
Deactivating eco Max mode
1 Press the MENU button
2 Use the + and - buttons to select 'Eco Max' and press OK to confirm.
3 When the display shows 'Turn Off', press OK to confirm.
Feed timer
You can set the feed timer to alert you that it is time to feed your baby. The timer can be set from 1
minute to 23 hours and 59 minutes.
1 To open the feed timer submenu, select 'Feed Timer' in the menu. Press OK to confirm.
2 Select 'Set Timer' in the feed timer submenu. Press OK to start setting the timer.
3 Set the hour and the minutes and press OK to confirm.
4 To start the feed timer, select 'xx:xx Start' in the feed timer submenu. Press OK to confirm.
The timer symbol appears on the display and the timer starts counting down (Fig. 25).
5 When the timer has reached 00:00, the feed timer alert goes off, the timer symbol starts
flashing on the display and the message 'TIMER END' scrolls across the display (Fig. 26).
6 To stop the timer, select 'Stop & Reset' in the feed timer submenu and press OK to confirm.
setting the feed timer repeat
1 To make the feed timer go off after the same set time, select 'Timer repeat' in the feed timer
submenu after you have set the timer. Press OK to confirm.
2 Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm. The timer repeat symbol
appears on the display.
3 If 'Repeat ON' is set, the feed timer starts counting down again after you stop the alert.
setting a feed timer alert
1 To set an alert, select 'Timer Alert' in the feed timer submenu. Press OK to confirm.
2 Choose one of the alert options. The options available are sound only, sound and vibration
and vibration only.
3 Press any key to stop the alert or the alert stops automatically after 2 minutes.
4 To stop the timer, select 'Stop & Reset' in the feed timer submenu and press OK to confirm.