Step 11: Attach And Route Pcb Cables - Toshiba Strara CTX Series Installation And Maintenance Manual

Step 11: Attach and Route PCB Cables

1. Determine the direction that you want the cables to exit the cabinet(s) from the following:
Single Direction Cable Routing – Cabling from the Expansion Cabinet can run through the
Base Cabinet and exit from the Base Cabinet (see
Figure 2-19 Single Direction Cable Routing
Opposite Direction Cable Routing – Cabling from the Expansion Cabinet can run through
the right and left sides (see
Figure 2-20 Opposite Direction Cable Routing
Strata CTX I&M September 2002
P ower S upply
Figure 2-20).
P ower S upply
Strata CTX100 Installation
Figure 2-19).
P ower S upply
A C C ord and
Battery C ables
6006
P ower S upply
A C C ord and
Battery C ables
6007
2-21