Cordless Telephone Connectors - Toshiba Strara CTX Series Installation And Maintenance Manual

To connect the cordless telephone using the AC adapter
1. Plug the AC adapter cord into the AC adapter input jack on the base unit (see
Use only the AC adapter supplied with your cordless digital telephone.
CAUTION!
AC Adapter
Figure 7-29 Cordless Telephone AC Adapter

Cordless Telephone Connectors

2. Plug the AC adapter into a standard 120VAC wall
outlet.
3. Route the power cord where it is not a trip hazard,
and where it will not become chafed and create a fire
or electrical hazard.
4. Wrap the power cord around the notch on the bottom
of the base unit (see
5. Check to see that the power LED is on, indicating the
telephone has power.
6. Before using your cordless digital telephone, be sure
to raise the antenna to the vertical position.
If the cordless telephone is connected to a DKT3000/3500-series telephone, be sure to
Important!
program the DKT3000/3500 telephone to act as a DKT2000/2500; otherwise, the LCD
readouts will not fit on the cordless telephone LCD. See
on Page 7-17
Strata CTX I&M September 2002
Figure 7-30).
for instructions.
Modular
Cords Line Out
to DKT
1175
Figure 7-30 Line Out Cord
"DKT2000/2500 Mode On/Off"
Station Apparatus
Figure 7-29).
Line in to Digital
Telephone Circuit
(BDKU or RDSU)
5232
See Chapter 6 –
MDF PCB Wiring
7-33